Spin Mold 45

Spin Mold for drilling out edged circular molds

• Needle tip makes it easy to pinpoint drilling location
• A tool for easily digging a 45 degree chamfered round mold.

[Product Details]

• Size (hole bottom diameter): 1.0, 1.5, 2.0, 2.5, 3.0mm
• Quantity: 5 pieces (1 piece for each size)
• Shaft thickness: Φ3mm
• Material: Special cutlery steel
• Made in Japan
• Specifications are subject to change without notice.

[ ! ] Notes

• Please use it after firmly fixing it to the pin vise.
• Please wear finger cots and gloves for your safety.
• Although it is manufactured using high-hardness metal, applying excessive force or using it in a prying manner may damage the blade and cause an unexpected injury.
• Try to keep the blade perpendicular to the surface you want to dig. If the blade is set diagonally, the center guide may break due to excessive load.
• Make sure there are no people around before starting work as the cutting object may fly out.
• It is very dangerous if cutting objects or broken blades get into your eyes and you may lose your eyesight. Please wear safety glasses for your safety.
• Please be careful not to injure yourself as the blade is sharp.
• Do not touch the cutting edge directly as it is dangerous.
• Do not apply more load than your capacity.
• After use, wipe with a clean cloth, apply anti-rust oil, and store in a case.
• Store in a case out of reach of small children.
• Be careful not to injure yourself when opening the lid of the case or removing the blade during use.
• Unlike a spin blade (no center guide), it cannot be used as a chisel.
• Due to its special shape, it cannot be re-polished in a spin blade polishing holder.
• There is a center guide so there is a small hole in the center.

Set of 5 bits with the following diameters

• 1.0mm
• 1.5mm
• 2.0mm
• 2.5mm
• 3.0mm