Photo Etched Detail Parts GLEP01

Photo Etched Parts from HIQParts for detailing model kits 

GLEP does not require gateless cutting!

• 0.3mm thick! 
• Precision made in Japan
• GATE LESS ETCHING PARTS=GLEP

GLEP is a general-purpose photo-etched part for improving detail.

• There is no gate, so there is no need to worry about distortion when cutting parts! 
• The photo-etched parts are in his bag sandwiched between the protective sheet and the lower layer sheet
• Peel off the protective sheet and take it out with tweezers. (If it is difficult to remove, press it slightly with your finger or a toothpick from the back side.) 
• Glue the photo-etched parts with instant glue
• Although it is called a gate, bridge is a common name in etching processing

Gillep has no bridges (gates).

• Therefore, there is no need to use nippers for metal to separate from surrounding support materials.
• Gate processing of metal parts is time-consuming and delicate parts can cause distortion, but GLEP eliminates this troublesome work!

What's good about 0.3mm thickness?

• The most commonly seen photo-etched parts for models are those with a thickness of 0.1 mm. 
• The reason why we made the expensive 0.3mm thick is that we aim to be an "alternative to fine plastic parts". 
• Therefore, we focus on making it as thick as possible so that the details are not easily damaged even when painted.
• The depth of the half-etched part is important so that it will not be buried even if it is painted. 
• The half-etched portion is a groove that covers 50% of the base material, so the thinner the base material, the shallower the half-etched groove.
• 0.1mm is 0.05mm, 0.2mm is 0.1mm.
• If the thickness is 0.3mm, the groove depth is 0.15mm.
• With a thickness of 0.3mm, the details are hard to fill even when painted, and the mold stands out even when inked!

[ ! ] Photo Etched Parts are EXTREMELY SMALL, please keep out of reach of children