Canada Post Strike will cause delays in shipping. Domestic orders will be shipped via UPS where applicable. Domestic shipping to rural areas and international shipping will be postponed.
When using for the first time, it is necessary to pass through the hole for the drill.
By inserting a 1mm size drill bit, you can remove the excess plating thickness inside the drill hole and optimize it for the drill bit you have.
A drill bit for iron work is recommended even after drilling.
Jigs for manual processing.
Assists in drilling 1 mm diameter holes on the end face and side of a round bar .
Compatible with plastic round bars with diameters of 2, 3, 4, and 5 mm.
A jig for making straight holes in the core (end face) and side of a plastic round bar.
For 1mm diameter drill bit only.
If you want to drill a hole smaller than 1 mm in diameter, use a drill bit with a 1 mm shaft and a small diameter tip (however, the overall length of the bit must be 18 mm or more for core and end face processing).
Please match the plastic rod itself to the specified size for high-precision processing.
Example: When using a 2.0mm hole, 2.00 to 2.05mm is acceptable
Be sure to use a drill bit of the specified size. The inner wall of the hole may be scraped, resulting in a loss of accuracy and the blade may not come out
The surface may have scratches that do not affect use.
